EDDYSTAR Carbon Fiber Intake System for Lynk & Co 01 2.0T 2017-2021 CMA Air Intake Kit
Product Details
Carbon Fiber Intake Lynk & Co 01
,2.0T Air Intake Kit 2017-2021
,CMA Carbon Fiber Air Intake
The EDDYSTAR Carbon Fiber Intake System is engineered for the Lynk & Co 01 2.0T (2017–2021), built on the CMA platform shared with the Volvo XC40 and Geely Xingyue. It replaces the restrictive factory airbox (OE 8888475602, approx. 249×243×51 mm) with a sealed prepreg carbon fiber enclosure and smooth-bore intake tube, reducing intake air temperature and unlocking the airflow headroom that the factory paper-element system leaves unused.
| Feature | Detail |
|---|---|
| Carbon Fiber Airbox (CF-R) | Sealed prepreg carbon fiber enclosure; effectively insulates engine bay heat and lowers intake air temperature |
| High-Flow Mushroom Filter | Washable and reusable; maintains filtration while increasing airflow |
| Third-Generation Vortex Design | Smooth-bore internal path reduces resistance and improves throttle response |
| Lossless / Bolt-on Installation | Direct fit to factory mounting points; no cutting or drilling required |
| Good Heat Resistance | Carbon fiber shell plus integrated thermal barrier |
- Throttle response: Sharper low-to-mid range response, addressing the factory intake restriction on the 2.0T CMA engine.
- Airflow: Increased intake volume versus the factory panel filter (OE 8888475602), supporting more consistent power delivery.
- Sound: Fuller, deeper induction note — a controlled character rather than harsh drone.
- ECU compatibility: No tuning required for installation; works with factory ECU programming.
| Chassis | Model | Engine | Year |
|---|---|---|---|
| CX11 | Lynk & Co 01 2.0T | 2.0T gasoline (JLH-4G20TD) | 2017–2021 |
Also compatible with Lynk & Co 02 / 03 / 05 2.0T and Volvo XC40 2.0T (CMA) where the same intake layout applies.
- Carbon Fiber Airbox (CF-R Vortex design)
- Low-resistance carbon fiber intake tube
- High-flow mushroom filter
- Silicone couplers & mounting hardware
- Installation guide
OE reference for original filter element: 8888475602 (2.0T gasoline). Cross-reference: MANN C25082 / C24051, MAHLE LX4821 / LX5539, BOSCH 0 986 AF3 368.
This is a complete intake system (airbox + tube + filter), not a replacement panel filter. The OE number is listed only as a reference for the original filter element.
Fitment confirmation: Designed for 2.0T gasoline only. Not for 01 PHEV (1.5T plug-in hybrid, OE 8888475605) — different intake layout and filter size. Please provide VIN if unsure.
Will this carbon fiber intake fit my 2010–2012 VW Golf 6 1.6L?
Yes. It is designed specifically for the VW Golf VI (5K1) with the 1.6L EA111 engine (2010–2012). It fits the 1.6L petrol and BiFuel (LPG) variants. Direct bolt-on fit with factory mounting points.
Does it require ECU tuning?
No. It works with the factory ECU. No remapping of ECU or DME is required. A custom tune can maximize gains but is not necessary.
What performance gains can I expect?
EDDYSTAR CF-R series carbon fiber intake systems have been independently tested to deliver up to 12% horsepower gain over the stock airbox, with improved air density and fuel efficiency. On a 1.6L naturally aspirated engine, this translates to a noticeable improvement in throttle response and top-end pull. Gains vary by fuel quality, altitude, and supporting mods.
Will it fit other VW/Audi 1.6L models?
Yes. It also fits VW Golf 6 Variant (AJ5) 1.6L, VW Jetta 1.6L, and other PQ35 platform models with the EA111 1.6L engine. Some models may require minor modification.
Will it trigger a check engine light?
No, if installed correctly. The MAF sensor housing is designed to factory specifications. Always reconnect the sensor properly.
How do I clean the filter?
Use a cold air intake cleaning kit. The filter is a washable, reusable high-flow design. DNA Filters' equivalent for this platform offers 98–99% filtration efficiency. Clean every 30,000–50,000 km depending on driving conditions.
Is installation difficult?
It is a direct bolt-on job using factory mounting locations. Basic hand tools are enough. Installation takes about 60–90 minutes. Professional installation is recommended.
Does it increase intake sound?
Yes. The carbon fiber intake system delivers a more pronounced induction note, especially at higher RPM. The sealed airbox design keeps the sound refined and reduces unwanted intake drone at highway speeds. The carbon fiber construction also acts as a thermal barrier, keeping intake air cooler and denser.
What is the factory OE part number?
The main air filter OE number is 1K0 129 620 D (or 1K0129620D). Also compatible with 1K0 129 620 E, 1K0 129 620 L, 1K0 129 620 ZC, 1K0 129 620 C, and 5C0 129 620. This helps confirm fitment.
What warranty do you offer?
Limited 2-year warranty against manufacturing defects. Does not cover improper installation or racing use.
Mrs. eddystar
Arab Marketing Manager
- Email: candy@eddystar.com
- tel: +86 18144845592
- Whatsapp: 8618144845592
-
Wechat:
+86 18144845592
-
High-Performance Air Filter – Upgrade Your Engine's Breathing
High-Performance Air Filter – Upgrade Your Engine's Breathing EDDYSTAR High-Performance Air Filter Upgrade your engine's breathing and unlock hidden horsepower with EDDYSTAR high-flow air filters. Engineered to replace restrictive OEM paper filters, these filters are manufactured from premium multi... -
Sport Shock Absorber Kit – Upgrade Your Suspension Performance
EDDYSTAR High-Performance Sport Shock Absorber Kit Upgrade your vehicle's ride quality and cornering performance with EDDYSTAR adjustable shock absorbers. Engineered for drivers who demand both comfort and control, these shocks offer independent height and damping force adjustment, allowing you to ... -
Racing Seat – Ultimate Support for Track & Street
EDDYSTAR Racing Seat – Ultimate Support for Track & Street Upgrade your driving experience with EDDYSTAR racing seats. Engineered to provide exceptional lateral support and driver comfort, these seats are manufactured from high-strength steel tube frames with impact-absorbing PU foam padding and ... -
Adjustable Shock Absorber Kit – Tune Your Ride Height & Damping
EDDYSTAR Adjustable Shock Absorber Kit Upgrade your vehicle's ride quality and cornering performance with EDDYSTAR adjustable shock absorbers. Engineered to provide both height and damping force adjustment, these shocks are manufactured from high-strength 50mm diameter monotube construction with ...
